642 Bronze Composition
C64200 is an alloy made up of 88% copper and 12% tin. It also contains other elements, such as aluminum or silicon which are added in very small amounts to enhance certain characteristics.
| 6.3 – 7.6 | 0.15 | 0.3 | 0.05 | 0.1 | 0.25 | 1.5 – 2.2 | 0.2 | 0.5 | ||
| 7.0000 | – | 91.2000 | – | – | – | – | 1.8000 | – | – |
642 Bronze Chemical Properties
As a copper-based alloy, C64200 has excellent corrosion resistance when exposed to water or salt water environments. Its high copper content also makes it highly resistant to wear and tear from wear particles in its environment.
642 Bronze Mechanical Properties
With its high tensile strength and low thermal expansion rate, Bronze 642 can hold up under heavy loads over long periods of time without deforming or breaking down. It also has good fatigue strength, making it suitable for use in applications that experience high levels of vibration or shock loading levels.
| Yield 0.2% | ||||||||
|---|---|---|---|---|---|---|---|---|
| % | ||||||||
| HR50 | >2-3" | >50-80mm | 35-37 | 240-255 | 75-90 | 515-620 | 15-35 | 120-150 |
| HR50 | >3-4" | >80-100mm | 30-35 | 205-241 | 70-80 | 485-551 | 15-40 | 120-150 |
| M10 | >4" | >100mm | 25-40 | 170-276 | 70-80 | 485-551 | 15-40 | 120-150 |
642 Bronze Physical Properties
C64200 Bronze 642 is 8.89 g/cm3, which makes it slightly heavier than steel but still light enough for many applications where weight is a factor. It also has a melting point of 875 degree (1627 degree F) which means that it can be melted down and cast into different shapes if needed.
C64200 Equivalent
| B150 |
Bronze 642 Specifications
ASME SB150
ASME SB283
AMS 4631
AMS 4634
ASTM B124
ASTM B150
ASTM B283
QQ-B-465
SAE J461
SAE J463
Bronze 642 Uses
Brass C64200
Bronze 642 is an alloy that is made up of 90% copper and 10% tin.
Bronze 642 can also be used for sculpture and other art forms because it can be cast into any shape.
Bronze 642 is also used in the production of bearings and gears because of its resistance to wear and tear.
Bronze 642 can also be used in jewelry production because it is a beautiful golden color.
Bronze 642 is also used in the production of plumbing fixtures because it is resistant to corrosion
Alloy C64200
The melting point of 875 degree (1627 degree F) makes Bronze 642 capable of withstanding higher temperatures than some other alloys without deforming or losing structural integrity over time due to extreme heat cycles experienced during operation at full speed under load conditions. This makes it ideal for use in engines operating at higher speeds over prolonged periods without requiring frequent replacement due to excessive heat damage caused by prolonged exposure at elevated temperatures over extended periods.
Bronze 642
Additionally, bronze can easily be welded using TIG MIG gas welding techniques depending on the application required, allowing greater versatility when creating custom components not available off-the-shelf.







